|
CONFIGURATION DESCRIPTION |
|
This production line combines a Friction Feeder, Roller Alignment Station, and a Vacuum Transport. Friction feeders are a reliable way to feed a wide variety of media from a stack. Media is discharged from the feeder onto the alignment station and registered to a straight guide before it is transferred onto the vacuum transport. Vacuum conveyance ensures that media is presented consistently past finishing equipment, such as ink jet printers and pressure sensitive labelers.
The system is capable of speeds up to 700 feet per minute or 60,000 pieces per hour dependent upon the media.
EnduranceTM Transports include mounting rails the length of the system for ease of integrating finishing equipment and accessories.
|
|
SPECIFICATIONS |
|
ORDERING INFORMATION |
|
· Transport Speed: § Variable Speed from 25 to 700 feet per minute. · Transport Bed: § Stainless Steel or Heat Resistant Aluminum. § Size Transport beds are available in 4, 6, or 8 foot length and 22 width. § (3) 2 belts, the center belt incorporates vacuum. · Electrical Requirements: § 220 volt, 30 amp, 1Ψ electrical service. · Media Size Range: § Minimum size: 3 wide x 5 long x single sheet. § Maximum size: 17 wide x 18 long x 1/16 thick. · System Dimensions: § See the Paragon Selection Guide · NOTE: All specifications are media dependent. |
|
1. Determine the vacuum bed length. Choose between 4, 6, or 8 feet. Locate the length in the first column of the chart below. 2. Determine the location of the electrical control panel. Location choices are explained on page 25. Choose the Electrical Controls location in the second column of the chart below. 3. Determine the vacuum bed construction required for your application. Two construction choices are offered: Stainless Steel (column three) or Heat Resistant Aluminum (column four). The construction choices are explained in the Paragon Selection Guide. 4. Choose the correct model number from column three or column four based on the criteria selected in steps 1 through 3. |
|
|
|
|
Model Number |
|
|
Vacuum Bed Length |
Electrical Controls |
|
Stainless Steel |
Heat Resistant |
|
4 |
Right Hand |
|
1500JRSR |
1500JRHR |
|
4 |
Left Hand |
|
1500JRSL |
1500JRHL |
|
|
|
|
|
|
|
6 |
Right Hand |
|
1500KRSR |
1500KRHR |
|
6 |
Left Hand |
|
1500KRSL |
1500KRHL |
|
|
|
|
|
|
|
8 |
Right Hand |
|
1500LRSR |
1500LRHR |
|
8 |
Left Hand |
|
1500LRSL |
1500LRHL |